Unifi Ap Nanohd

by

  1. Unifi Ap-nanohd
  2. Unifi Ap Nanohd Firmware
Mounting Bracket

Unifi 6 Lite vs NanoHD. Posted by 23 days ago. Unifi 6 Lite vs NanoHD. And 2 nanoHD AP’s. Standing just feet away from the nanoHD, I get 250-300 Mbps WiFi throughput (testing with an iPhone 12 Pro Max connected via the 5 GHz network). If I disconnect the nanoHD and plug in a 3-year-old NetGear R7000P router/AP (via the. Download the latest firmware updates for your access point. To see current configuration go to: Settings Maintenance Support Info Show System Config. Perform an RF Scan to see what sort of interference is happening in the area (UniFi Controller, Devices section, clicking on the AP you wish to scan, and in the Properties Panel that slides. Wi-Fi 6 Access Point with dual-band 2x2 MIMO in a compact design for low-profile mounting. UniFi 6 Lite is a 2x2 Wi-Fi 6 access point that delivers up to 1.5 Gbps aggregate radio rate with 5 GHz (MU-MIMO and OFDMA) and 2.4 GHz (MIMO) radios. Mount UniFi 6 Lite horizontally in the ceiling to cover a high-density environment, or mount it vertically on the wall to extend its range. The UniFi nanoHD Access Point features a low-profile form factor. The optional ceiling mount or custom skins allow the AP to blend even more discreetly into its setting. Low-profile mounting accessory is sold separately Buy Now.

Screws (Qty. 4)
Keps Nuts (Qty. 4)
Gigabit PoE* (48V, 0.3A) with Mount Bracket

* Included only in the single-pack of the UAP-nanoHD.

  • CAT5 cable
  • Phillips screwdriver
  • Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
  • Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)

IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher, available at: ui.com/download/unifi

System Requirements

Unifi Ap-nanohd

  • Microsoft Windows 7/8/10, Mac OS X, or Linux
  • Java Runtime Environment 1.8 (or above)
  • Web Browser: Google Chrome (Other browsers may have limited functionality.)
  • UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi)

LED

Ports

Locking Notch

The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.)

Reset

The Reset button serves two functions for the UniFi AP:

  • Restart Press and release the Reset button quickly.
  • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds.

Ethernet

This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server.

Cable Feed Plug

If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug.

Mounting Bracket

Locking Tab

During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft.

Initial Position

Final Position

Note: If you need to remove the UniFi AP from the Mounting Bracket, insert a paper clip in the Slot to release the Locking Tab and turn the UniFi AP counterclockwise.

The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.

Wall Mount

Nanohd

    Optional

Ceiling Mount

The UAP-nanoHD features auto-sensing 802.3af PoE support and can be powered by any of the following:

  • Ubiquiti UniFi Switch with PoE
  • 802.3af PoE compliant switch
  • Ubiquiti Gigabit PoE Adapter (48V, 0.3A)

The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately.

Connecting to a PoE Switch

Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port on the switch.

UAP-nanoHD

Dimensions

160 x 160 x 32.65 mm

(6.3 x 6.3 x 1.29')

Weight

  • With Mounting Kits

300 g (10.6 oz)

  • 315 g (11.1 oz)

Networking Interface

(1) RJ45 GbE

Buttons

(1) Reset to Defaults

Power Method

802.3af

Power Supply

48V, 0.3A Gigabit PoE Adapter*

Max. Power Consumption

10.5W

Operating Frequency

2.4 GHz

5 GHz

Max. TX Power

  • 2.4 GHz
  • 5 GHz
  • 23 dBm
  • 26 dBm

Antenna Gain

  • 2.4 GHz
  • 5 GHz
  • 2.8 dBi
  • 3 dBi

MIMO

  • 2.4 GHz
  • 5 GHz
  • 2x2
  • 4x4

Radio Rate

  • 2.4 GHz
  • 5 GHz
  • 300 Mbps
  • 1733 Mbps

Wi-Fi Standards

802.11 a/b/g/n/ac/ac-wave2

Wireless Security

WEP, WPA-PSK,
WPA-Enterprise (WPA/WPA2, TKIP/AES)

BSSID

8 per Radio

Mounting

Wall/Ceiling (Kits Included)

Operating Temperature

-10 to 70° C (14 to 158° F)

Operating Humidity

5 to 95% Noncondensing

Certifications

CE, FCC, IC

* Only the single-pack of the UAP-nanoHD includes a PoE adapter.

Unifi Ap Nanohd

Unifi Ap Nanohd Firmware

Operating Frequency (MHz)

US/CA

2400 - 2483.5

U-NII-1

5150 - 5250

U-NII-2A

5250 - 5350

U-NII-2C

5470 - 5725

U-NII-3

5725 - 5850

Worldwide

2400 - 2483.5
5150 - 5875